what im working on....
4 posts
• Page 1 of 1
this is a very, very, very rough plan of something pablo is making:
edit: might have gotten cutt off slightly X_X
anyway, its for a 1/1 scaled Chainsword, of warhammer 40k origion,
Current plan is to make it in layers, the one with the Teeth is the middle, whille the other shown thrre is basically top/bottom,
the red sections are the "cut here" lines, with the middle secion, where the grip is, has a a bit more cut out to allow a tube to be placed to act as a grip.
Not shown: engine housing, exterior "decorations", etc
any ideas or suggestions, improvemnts, etc?
edit: might have gotten cutt off slightly X_X
anyway, its for a 1/1 scaled Chainsword, of warhammer 40k origion,
Current plan is to make it in layers, the one with the Teeth is the middle, whille the other shown thrre is basically top/bottom,
the red sections are the "cut here" lines, with the middle secion, where the grip is, has a a bit more cut out to allow a tube to be placed to act as a grip.
Not shown: engine housing, exterior "decorations", etc
any ideas or suggestions, improvemnts, etc?
- pablofiasco
- Posts: 287
- Joined: Fri Aug 15, 2008 2:36 am
- Location: where we are going, we wont need eyes anymore
Well, if I remember my chainswords right, the rounded corner is supposed to be on the exposed side, rather than the back of the 'blade.'
Pic 1
Pic 2
Both large images, very large. But they should give you an idea as to the basic guard design and so on. The motor seems to be more variable in design, with the most recent versions having more ornate arrangements of exhausts and so on.
Pic 1
Pic 2
Both large images, very large. But they should give you an idea as to the basic guard design and so on. The motor seems to be more variable in design, with the most recent versions having more ornate arrangements of exhausts and so on.
- Stormcaller3801
- Posts: 496
- Joined: Wed Jun 17, 2009 3:38 am
you are correct there but im taking a small hit from the creative license hookha (and i also cant do the teeth on a curve cutting and make it look "natural")
- pablofiasco
- Posts: 287
- Joined: Fri Aug 15, 2008 2:36 am
- Location: where we are going, we wont need eyes anymore
yeah more crapy mspaint!
heres a rough idea, of how i might do the teeth in a future, or "production" prop:
http://www.urbandecayonline.com/costume/tooth.bmp
two differnt Ideas, with teh teeth seperate from the body of teh blade itself,
the one onthe left, maybe remove the one peg, and just screw threw the "block" part into teh blade body, then the next tooth down covers up the screw, etc,
the other on teh right is more straightforward, have matching holes in teh sword, and glue the suckers down,
either way, i could have a variety in the teeth designs (small, long, Spacewolf style, chaos, broken, etc)
heres a rough idea, of how i might do the teeth in a future, or "production" prop:
http://www.urbandecayonline.com/costume/tooth.bmp
two differnt Ideas, with teh teeth seperate from the body of teh blade itself,
the one onthe left, maybe remove the one peg, and just screw threw the "block" part into teh blade body, then the next tooth down covers up the screw, etc,
the other on teh right is more straightforward, have matching holes in teh sword, and glue the suckers down,
either way, i could have a variety in the teeth designs (small, long, Spacewolf style, chaos, broken, etc)
- pablofiasco
- Posts: 287
- Joined: Fri Aug 15, 2008 2:36 am
- Location: where we are going, we wont need eyes anymore
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 11 guests